H05VV-F Fiilo Koronto ah oo Dabacsan
Codsiga
Fiilada waxay ku habboon tahay in lagu xiro qalabka korantada, iftiinka korontada ee qalabka korontada guriga iyo qalabka, fiilooyinka gudaha ee qalabka korontada, qalabka elektarooniga ah, qalabka iswada iwm.
Dhisme
Sameeyaha: Koodh naxaas ah oo qaawan oo dabacsan.Raac VDE-0295 CI-5 ama 6, IEC 60228/HD383 CI-5 ama
Dahaarka: dabaqa dahaadhka PVC T12, raac VDE-0281 Qaybta 1
Midabka siliga xudunta u ah: Codaynta midabku waxa ay raacdaa VDE-0293-308 silig huruud ah-cagaaran (saddex geesood iyo wixii ka sareeya)
Galka dibadda: Galka sare ee PVC TM2.Madow ama cawl (sidoo kale waa la beddeli karaa)
Astaamaha
Danab lagu qiimeeyay: 300/500V
Korontada tijaabada: 2000V
Kala duwanaanta heerkulka:
Ku rakibida go'an: -40 ° C ilaa + 80 ° C;
Ku rakibida moobilka: -5°C ilaa +80°C (la beddeli karo -55°C ilaa +105°C)
Wareegtada leexsan:
gogol go'an: 4xD (dhexroorka fiilada dibadda);
Ku rakibida mobilada: 7xD (dhexroorka fiilada dibedda)
Iska caabbinta shucaaca:
Heerkulka lagu gaari karo wareegga gaaban: +160 ° C
Dab-demiska: waafaqsan IEC60332-1 ama -2
Iska caabin: caabbinta dahaarka: 20 MΩ x km
Heerarka
GB/T5023, IEC60227, BS6500, VDE0281, JB/T8734
Halbeegyada
| Koore x aagga qaybta Cross | dhumucda dahaarka | Dhumucda galka | Dhexroorka dibadda | Iska caabinta maamulaha ee 20 °C | Iska caabinta dahaarka 70 °C |
| magac ahaan | magac ahaan | min-max. | max | min. | |
| mm2 | mm | mm | mm | Ω/km | MΩkm |
| 2X0.75 | 0.6 | 0.8 | 5.7-7.2 | 26 | 0.011 |
| 2X1 | 0.6 | 0.8 | 5.9-7.5 | 19.5 | 0.01 |
| 2X1.5 | 0.7 | 0.8 | 6.8-8.6 | 13.3 | 0.01 |
| 2X2.5 | 0.8 | 1 | 8.4-10.6 | 1.98 | 0.009 |
| 2X4 | 0.8 | 1.1 | 9.7-12.1 | 4.95 | 0.007 |
| 3X0.75 | 0.6 | 0.8 | 6.0-7.6 | 26 | 0.011 |
| 3X1 | 0.6 | 0.8 | 6.3-8.0 | 19.5 | 0.01 |
| 3X1.5 | 0.7 | 0.9 | 7.4-9.4 | 13.3 | 0.01 |
| 3X2.5 | 0.8 | 1.1 | 9.2-11.4 | 1.98 | 0.009 |
| 3X4 | 0.8 | 1.2 | 10.5-13.1 | 4.95 | 0.007 |
| 4X0.75 | 0.6 | 0.8 | 6.6-8.3 | 26 | 0.011 |
| 4X1 | 0.6 | 0.8 | 7.1-9.0 | 19.5 | 0.01 |
| 4X1.5 | 0.7 | 1 | 8.4-10.5 | 13.3 | 0.01 |
| 4X2.5 | 0.8 | 1.1 | 10.1-12.5 | 1.98 | 0.009 |
| 4X4 | 0.8 | 1.2 | 11.5-14.3 | 4.95 | 0.007 |
| 5X0.75 | 0.6 | 0.9 | 7.4-9.3 | 26 | 0.011 |
| 5X1 | 0.6 | 0.9 | 7.8-9.8 | 19.5 | 0.01 |
| 5X1.5 | 0.7 | 1.1 | 9.3-11.6 | 13.3 | 0.01 |
| 5X2.5 | 0.8 | 1.2 | 11.2-13.9 | 1.98 | 0.009 |
| 5X4 | 0.8 | 1.4 | 13.0-16.1 | 4.95 | 0.007 |
FAQ
S: Ma haysan karnaa calaamadayada ama magaca shirkadda si loogu daabaco alaabtaada ama xirmada?
J: Amarka OEM & ODM si diiran ayaa loo soo dhaweeyay waxaanan leenahay khibrad buuxda oo guul leh mashaariicda OEM.Intaa waxaa dheer, kooxdayada R&D ayaa ku siin doona talooyinka xirfadeed.
S: Sidee ayay shirkaddaadu ka qabataa Xakamaynta Tayada?
A: 1) Dhammaan alaabta ceeriin waxaan dooranay mid tayo sare leh.
2)Shaqaalaha xirfadlayaasha ah iyo kuwa xirfadda leh waxay daryeelaan tafaasiil kasta oo ku saabsan maaraynta wax soo saarka.
3) Waaxda Xakamaynta Tayada oo si gaar ah uga masuula hubinta tayada habsocod kasta.
S: Sideen ku heli karaa muunad si loo tijaabiyo tayadaada?
J: Waxaan ku siin karnaa muunado bilaash ah baaritaankaaga iyo hubintaada, kaliya waxaad u baahan tahay inaad qaado kharashka xamuulka.
