H05V-R H07V-R Copper PVC silig dhisme ah oo dahaaran
Codsiga
Fiilooyinka H05V-R/H07V-R waxaa inta badan loo isticmaalaa gudaha gudaha, tuubooyinka fiilooyinka, warshadaha warshadaha ama saldhigyada beddelka, iyo rakibaadda dhulka hoostiisa.Waxa loo isticmaali karaa looxyada qaybinta iyo baalaladaha, ama qalabka u baahan tiro badan oo xadhig ah.
Dhisme
Astaamaha
| Korantada shaqaynaysa | 300/500 V (H05V-R) |
| Korantada shaqaynaysa | 450/750 V (H07V-R) |
| Tijaabi danab | 2000 V (H05V-R), 2500 V(H07V-R) |
| Radius foorarsan oo firfircoon | 15 x Ø |
| Baadhista foorarsan ee taagan | 15 x Ø |
| Heerkulka shaqada | -5ºC ilaa 70ºC |
| Heerkulka taagan | -30ºC ilaa 80ºC |
| Heerkulku wuxuu gaadhay wareeg gaaban | 160º C |
| ololka celiye | IEC 60332.1 |
| Iska caabin dahaarka | 10 MΩ x km |
Heerarka
Caalamiga ah: IEC 60227
Shiinaha: GB/T 5023-2008
Heerarka kale sida BS, DIN iyo ICEA marka la codsado
Halbeegyada
| Qaybta isdhaafka | Dhismaha Maamule | Dhumucda dahaarka | Guud ahaan dhexroorka Max | Iska-caabbinta ugu yar | Miisaanka Qiyaastii |
| (mm2) | (Maya/mm) | (mm) | (mm) | (ohm/Km) | (Kg/Km) |
| 1x0.75 | 7/0.97 | 0.6 | 2.8 | 0.012 | 11 |
| 1x1.0 | 7/0.43 | 0.6 | 3 | / | 14 |
| 1x1.5 | 7/0.52 | 0.7 | 3.4 | 0.01 | 21 |
| 1x2.5 | 7/0.67 | 0.8 | 4.2 | 0.009 | 32 |
| 1x4 | 7/0.85 | 0.8 | 4.8 | 0.008 | 45 |
| 1x6 | 7/1.04 | 0.8 | 5.4 | 0.007 | 65 |
| 1x10 | 7/1.35 | 1 | 6.8 | 0.007 | 110 |
| 1x16 | 7/1.70 | 1 | 8 | 0.005 | 165 |
| 1x25 | 7/2.14 | 1.2 | 9.8 | 0.005 | 264 |
| 1x35 | 7/2.52 | 1.2 | 11 | 0.004 | 360 |
| 1x50 | 19/1.78 | 1.4 | 13 | 0.005 | 490 |
| 1x70 | 19/2.14 | 1.4 | 15 | 0.004 | 685 |
| 1x95 | 19/2.52 | 1.6 | 17.5 | 0.004 | 946 |
| 1x120 | 37/2.03 | 1.6 | 19 | 0.003 | 1181 |
| 1x150 | 37/2.25 | 1.8 | 21 | 0.003 | 1453 |
| 1x185 | 37/2.52 | 2 | 23.5 | 0.003 | 1821kii |
| 1x240 | 61/2.24 | 2.2 | 26.5 | 0.003 | 2383 |
| 1x300 | 61/2.50 | 2.4 | 29.5 | 0.003 | 2983kii |
| 1x400 | 61/2.85 | 2.6 | 33.5 | 0.003 | 3800 |
FAQ
S: Ma haysan karnaa calaamadayada ama magaca shirkadda si loogu daabaco alaabtaada ama xirmada?
J: Amarka OEM & ODM si diiran ayaa loo soo dhaweeyay waxaanan leenahay khibrad buuxda oo guul leh mashaariicda OEM.Intaa waxaa dheer, kooxdayada R&D ayaa ku siin doona talooyinka xirfadeed.
S: Waa maxay shuruudaha lacag-bixinta?
A: 30% T / T deebaaji, 70% T / T dheelitirka bixinta ka hor shixnadda.
S: Sidee warshaddaadu ka qabtaa ilaalinta tayada?
J: Waxaan leenahay nidaam xakamaynta tayada adag, khubaradayada xirfadlayaasha ah ayaa hubin doona muuqaalka iyo tijaabinta hawlaha dhammaan alaabtayada ka hor inta aan la dhoofin.
S: Sideen ku heli karaa muunad si loo tijaabiyo tayadaada?
J: Waxaan ku siin karnaa muunado bilaash ah baaritaankaaga iyo hubintaada, kaliya waxaad u baahan tahay inaad qaado kharashka xamuulka.
